LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Drive Shaft - Removal & Installation (Coupe)) >> Driveline/Axles >> Drive Shaft Right-Hand Side, Replace >> Installation >> Install the Drive Shaft In the Gearbox

Install the Drive Shaft In the Gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Support Bearing Cap
GLL109772Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the seal plug.

NOTE: Do not damage the sealing ring in the transmission or the boot on the drive shaft.

Install new  bearing cap (steel) for the drive shaft support bearing. Tighten to 25 Nm  .