Installing the Backrest

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Screw And Connector At Seat Hinge

Courtesy of VOLVO CARS OF NORTH AMERICA.

HINT: If both backrests have been removed, it is best to assemble 60% of the backrest first.

Install:

the backrest
the mounting screw for the hinge. Tighten to 50 Nm
the connector for the hinge
mounting for the end of the seat belt. Tighten to 48 Nm
the side cushion.
Fold down the cushion.