LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Steering Wheel, Column Covers - Removal & Installation (Coupe)) >> Steering >> Steering Wheel, Replacing (version 1) >> Replacing the Wiring Harness/Oil Temperature Sensor >> Removing Lifting Beams And The Lifting Hook

Removing Lifting Beams And The Lifting Hook

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Gear-Shift Position Sensor
GLL109388Courtesy of VOLVO CARS OF NORTH AMERICA.

Twist in the tab on the cable harness holder.

Install the screw for the gear-shift position sensor and holder. Tighten to 25 Nm  .

Install the lever on the gear shift linkage rod. Tighten the nut. Tighten to 16 Nm  .

scientia non olet · About LEMON Manuals