Installing the control system cover

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Control System Cover, Harness Clamp, Cooler Return Line And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Reinstall the control system cover on the gearbox. Tighten the screws alternately. Tighten to 12 Nm . Torx TX 40.

Install:

the oil pipe on the gearbox with a new O-ring
the return line to the control system cover
the cable harness to the holder on the cover
the ground lead for the gearbox.