Installing Seat: Reinstalling
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Reinstall in reverse order.
NOTE:
First tighten the rear inner mounting bolt. Then continue with both front mounting bolts and finally tighten the rear outer mounting bolt. If this is not done the seat may not be oriented correctly.
Tightening torques, seats/floorpan: 40 10 Nm (30 10 ft. lb)