Cutting and stripping pairs of cables

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cables Cut With Approximately 40 Mm Between Splices

Courtesy of VOLVO CARS OF NORTH AMERICA.

Release the cable from the cable harness so that you have plenty of room in which to work.

NOTE:

The maximum permitted twinned length after splicing is 100 mm. This is to prevent interference problems.

Cut the cables so that there is approximately 40 mm between the splices (center to center) (A).