Igniter wire connector

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Igniter Wire Connector (1 Of 2)

Courtesy of VOLVO CARS OF NORTH AMERICA.

If dismantling the contact reel it is very important that the catch function on the connector is released first. Disconnection should be done in line with the attachment so as not to damage it.

NOTE:

The use of tools of any kind are not advised when disconnecting due to an increased risk of damage to the connector.

Fig 2: Igniter Wire Connector (2 Of 2)

Courtesy of VOLVO CARS OF NORTH AMERICA.

The contact is securely installed to make the contact attachment durable.

WARNING:

A damaged connector can cause failures in the function of the supplemental restraint system (SRS).