LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Airbag, Module Seat, Contact Reel - Removal & Replacement (Coupe)) >> Restraints >> Contact Reel/Steering Wheel Angle Sensor, Replacing >> Contact Reel Driver Airbag Module, Resetting >> Unsecuring the Contact Reel

Unsecuring the Contact Reel

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing One Torx 20 Screw
GLL105317Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove one Torx 20 screw.

Fig 2: Turning Contact Reel Clockwise To Limit Position
GLL105319Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel clockwise to the limit position.

Fig 3: Turning Contact Reel Counter-Clockwise Two Entire Turns
GLL105318Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the contact reel counter-clockwise two entire turns. Then turn counter-clockwise further until the screw hole is at " one o'clock" as illustrated.

NOTE: On later models, the yellow marking must also be visible in the window.