Lifting Beam And Lifting Hook, Installing On Engine Lifting Eyelet

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lifting Beam And Lifting Hook Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Position the stand for lifting beam 9995716 on the upper wheel arch members.

Then position the lifting beam directly above the engine lifting eyes on both sides.

Connect lifting hook 9995460 . Tighten to light contact.