Removing the Drive Shaft, Continued

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Drive Shaft Detached With Jimmy Bar

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Only applies to cars with 4T65AWD transmissions.

Detach the drive shaft. Use jimmy bar 9995462 B (modified according to the Tool Bulletin). Hold the spring strut out of the way and remove the drive shaft. Do not damage the sealing ring in the chain housing when removing the drive shaft.