Adjusting rear toe angle
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
- Slacken off the inner nut on the track rod
- Adjust the toe angle to correct value according to Wheel camber, specifications using the eccentric screw. Tighten the nuts slightly.
- Check the thrust angle. It does not comply with the specified value, undo the nuts and readjust the toe angle.
- Tighten the nut. See: Tightening torque .