Center Nut, Drive Shaft And Tightening Torque: Notes
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
HINT: Applies to 1998-2000: If the lock nut which was installed in step 3 (B) does not remain in place or was replaced during a repair, flanged nut (P/N 3089 6406) must be used with the same tightening torque as for the 2001 - (C) version.