Installing Components Around the Audio Unit
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the audio unit. Press down so that the catches engage
- the climate control module (CCM) using the 4 screws
- the front panel. Press down so that the catches engage
- the 3 screws
- the connectors.
Check that there is no dirt in the optical connectors.
NOTE:
The bend radius of the optic cables must not be less than 25 mm. Angle in the infotainment/comfort panel with bracket.
HINT: Align the upper section and press it upwards so that the lower section can be worked in.
CAUTION:
Work carefully so that the panels are not damaged.
Install:
- the 2 screws
- the frame
- the gear selector lever panel.