Installing wheel

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crosswise Tightening

Courtesy of VOLVO CARS OF NORTH AMERICA.

Make sure that brake discs and rim contact surfaces are clean.
Grease hub center rim guide with anti-rust agent 116 1038-3.
Install wheel.
Tighten bolts handtight. Then tighten them crosswise to 110 Nm (80 ft. lb). If using an airgun, use torque socket 1158147 .

NOTE: Tightening bolts crosswise to a specific torque setting is important in preventing stresses in the brake disc.