Installation of brake pads
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Grease shim on both sides with a thin layer of silicone grease (PN 116 1325-4).
- Install shim towards brake pad rear plates.
- Install brake pads.
- Install one split pin and retaining spring first, then the other split pin.