Remove the ABS hydraulic modulator with its bracket

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Pipes To Wheel Brakes From ABS Hydraulic Modulator

Courtesy of VOLVO CARS OF NORTH AMERICA.

Disconnect the brake pipes to the wheel brakes from the ABS hydraulic modulator.

Hang the brake pipes on the cross member.

Plug the brake pipes and connections for the ABS hydraulic modulator and master cylinder. This is to prevent contaminants entering the system.

Remove the 3 mounting screws for the bracket by the side member. Lift up the bracket.

Fig 1: Brake Pipes To Wheel Brakes From ABS Hydraulic Modulator

Courtesy of VOLVO CARS OF NORTH AMERICA.

Disconnect the brake pipes to the wheel brakes from the ABS hydraulic modulator.

Note the position of the pipes in the hydraulic unit .

Hang the brake pipes on the cross member.

Plug the brake pipes and connections for the ABS hydraulic modulator and master cylinder. This is to prevent contaminants entering the system.

Remove the 3 mounting screws for the bracket by the side member. Lift up the bracket.