Install the new brake pipe
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Remove the cut-off brake pipe. Install the new one.
Tighten the brake pipe in the joint nipple. Tighten to 22 Nm .
Secure the brake pipe in its clips in the body floor.
Bend and adjust the brake pipe so that it aligns with the hydraulic unit.