Install the Brake Pipe In the ABS Hydraulic Modulator

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Left Brake Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the brake pipe in the ABS hydraulic modulator. Tighten to 17 Nm
the pipe in its holder. Open the holder
the ABS line in its clips on the brake pipe
the integrated relay/fusebox. See Install the Integrated Relay/Fusebox .
the air cleaner (ACL) housing.