Bleeding Brakes (Procedure 1): Checking

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Braking Several Times To Stop

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove bleed unit connector from brake fluid reservoir.
Check if there is any air left in the system by depressing brake pedal as if braking sharply.
With engine off and brake pedal depressed 3-4 times, pedal travel should not exceed 40 mm (1.57").

If pedal travel exceeds 40 mm (1.57"), bleed again and check pedal travel once more.
Check that fluid level is not over MAX mark.
Let car down.