General Tightening Torque

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Screws coated with a locking fluid or self locking nuts must be replaced with new when reinstalled.

See the table below to find the tightening torques for components not included in the summary.

Nuts and screws which are not self locking can be reused provided that they are in good condition.

TIGHTENING TORQUE

Applies to screwed joint with strength class 8.8.
Thread	Tightening torque (Nm)
M5	5
M6	10
M7	17
M8	24
M10	50
M12	80
M14	130

NOTE: Screws coated with a locking fluid or self locking nuts must be replaced with new when reinstalled.

See the table below to find the tightening torques for components not included in the summary.

Nuts and screws which are not self locking can be reused provided that they are in good condition.

Tightening Torque

Applies to screwed joint with strength class 8.8.
Thread	Tightening torque (Nm)
M5	5
M6	10
M7	17
M8	24
M10	50
M12	80
M14	130

NOTE: Screws coated with a locking fluid or self locking nuts must be replaced with new when reinstalled.

See the table below to find the tightening torques for components not included in the summary.

Nuts and screws which are not self locking can be reused provided that they are in good condition.

Applies to screwed joint with strength class 8.8.
Thread	Tightening torque (Nm)
M5	5
M6	10
M7	17
M8	24
M10	50
M12	80
M14	130

CAUTION: Screws coated with a locking fluid or self locking nuts must be replaced with new when reinstalled.

See the table below to find the tightening torques for components not included in the summary.

Nuts and screws which are not self locking can be reused provided that they are in good condition.

Applies to screwed joint with strength class 8.8.
Thread	Tightening torque (Nm)
M5	5
M6	10
M7	17
M8	24
M10	50
M12	80
M14	130