Installing the throttle body, components
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the throttle body using a new gasket
- the 4 M6 screws and tighten.
- the fresh air hose to the throttle body and tighten the hose clip
- the air cleaner (ACL) housing
- the connectors, x3
- the cover over the control module
- the intake hose
- the engine cover.
Reset trim. See Adaptation Of Throttle Module