Removing the sub-frame

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sub-Frame Rear Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position a lifting table under the sub-frame

Remove the following on both sides:

the screws holding the sub-frame brackets in the bodywork.
the screw for the sub-frame mounting.

Carefully lower the sub-frame.

NOTE: Ensure that the brake pipe clears the exhaust pipe mounting when lowering the frame.

NOTE: Ensure that the steering gear screws release from the sub-frame.