Removing the right engine mounting

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fender Liner Plastic Nuts And Protective Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

Slacken off the right lower front part of the fender liner.

Remove:

the plastic nuts on the fender liner
the protective plate.

Bend out the fender liner.

Fig 2: Identifying Vibration Damper Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 4 screws for the vibration damper. Counterhold the crankshaft central nut.

Remove the vibration damper.

Fig 3: Right-Hand Engine Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 2 screws for the right hand engine mounting. (1)