Sub-Frame Front, Replacing: Preparation

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fixture Kit, Lifting Beam And Lifting Hooks

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install lifting lug 9997018 on the left hand side of the engine at the 2 screws.

Lock the lifting lug using the snap ring.

Install lifting tool 9995716 converted with kit 9997070 . Install lifting hooks 9995460 .

Lift the engine to relieve the load on the engine pads.

Remove the front wheels.