LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Sub-Frame - Replacement (Coupe)) >> Body & Frame >> Sub-Frame Front, Replacing (M56) >> Installing the drive shaft

Installing the drive shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Install new screws on both sides. Use a screwdriver as a counterhold. Tighten to 35 Nm  . Angle-tighten 90°  . Use bevel protractor 9512050 .

scientia non olet · About LEMON Manuals