Press in the bushing
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Press the halves with the tool and guide the tool up so that the bushing halves are opposite each other as shown in the illustration. Then tighten to 200 Nm .
NOTE:
Important that the tool is tightened to 200 Nm
so that the bushing sleeve cones correctly.