Connection of tools

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The exhaust system may be extremely hot if the car has been driven immediately before commencing work. Allow the system to cool before starting the procedure, otherwise the special tool may be damaged by the heat.

Fig 1: Checking For Air Leakage In Exhaust System

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove exhaust system tail pipe.
Attach tool 9995546 and pressure regulator 9995544 to exhaust system.
Adjust pressure to 0.4 bar (5.8 psi). Lower pressure may be necessary depending on condition of exhaust system.