Installing security strap (Motronic 4.4)
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
As part of the anti-theft system on cars equipped with an engine immobilizer, the engine control module (ECM) box in the engine compartment is locked into place with a locking strip. The locking strip is installed with a security screw.
CAUTION:
Before reinstalling security strap, ensure that the car has been repaired and no faults persist.
- Locate the slit underneath the control module box with your fingers and hook the locking strip into it.
- Fold over the locking strip and tighten the security screw (P/N 1334099-7) so that its head breaks off.