Installing EVAP canister shut-off valve

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying EVAP Canister Shut-Off Valve, Hose, And Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect hose to EVAP canister shut-off valve. Use a new clamp, see Spare Parts Catalogue for correct P/N.

NOTE:

It is important to use the correct clamp to avoid fuel leakage at the joint.

Install valve on mounting in bodywork.
Connect valve connector.