Connector D

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Measurements are taken to ground, connection 36 on breakout box, if not otherwise advised.

U_bat = Battery voltage

Connection to breakout box	Connection to control module	Connection to connector	Corresponding button on control panel	No operation	Operation
31	P2	1	Memory button 2.	U_bat	moves to 0 V
32	P1	2	Memory button 1.	Ubat	moves to 0 V
33	P	3	Programming button.	Ubat	0 V
34	-	4	-	0 V	0 V
35	-	5	-	0 V	0 V
36	R31	6	Ground connection.	0 V	0 V
37	R31	7	Ground connection.	0 V	0 V
38	R1+	8	Seat-cushion forward longitudinal adjustment.	U_bat	moves to 0 V
39	R1-	9	Seat-cushion rearward longitudinal adjustment.	U_bat	moves to 0 V
40	R2+	10	Seatback adjustment forward.	U_bat	moves to 0 V
41	R2-	11	Seatback adjustment rearward.	U_bat	moves to 0 V
42	R3+	12	Seat-cushion rear edge upwards adjustment.	U_bat	moves to 0 V
43	R3-	13	Seat-cushion rear edge downwards adjustment.	U_bat	moves to 0 V
44	R4+	14	Seat-cushion front edge upwards adjustment.	U_bat	moves to 0 V
45	R4-	15	Seat-cushion front edge downwards adjustment.	U_bat	moves to 0 V
46	P3	16	Memory button 3.	U_bat	moves to 0 V

Fig 1: Identifying Connector D Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.