Loose Connections (Terminals)
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
For repair of wiring and terminals, see the appropriate system wiring diagram.
Loose connections in terminals may be caused by oxidation of the pins and sockets, or by a faulty connection of a cable to its cable terminal.
Loose connections produce the same faults as an intermittent open-circuit in a cable.
Checks:
- Inspect terminals visually according to Inspect terminals visually .
Continue according to Contact resistance and oxidation .