LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Relay/Fuse Box - Removal & Installation (Coupe)) >> Electrical >> Relays, Fuse Boxes And Wiring >> Removing >> Preparations

Relays, Fuse Boxes And Wiring: Removing: Preparations

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Avoid skin contact with the oil.

The method description applies to all engine options. The illustrations primarily shown the turbocharged engine (B5234T) in early and late designs. The illustrations show the right-hand drive design only when difference to the working method apply.

Fig 1: Identifying Steering Wheel Position
GLL126340Courtesy of VOLVO CARS OF NORTH AMERICA.

Set the steering wheel position.

Remove the lever for steering wheel adjustment.

Push the steering wheel to the bottom position and angle upward as far as possible. Lock the steering wheel with the lever.

Place the gear-shift selector in the N-position.

Fig 2: Identifying Battery, ACL & Air Intake
GLL109146Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

Remove the timer valve from the air cleaner (ACL) housing (Turbocharged engines only)