LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Axle Shafts, Transmission Control Module - Removal, Replacement And Installation (Coupe)) >> Drive Shafts, Removing (Aw50-42; M56; 1998) >> Drive shafts, removing >> Checking the drive shafts >> Removing the drive shaft >> Remove the drive shaft from the hub.

Remove the drive shaft from the hub.

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drive Shaft Pulled Out From Hub
GLL126285Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn and fold out the spring strut. Tap on the drive shaft's end with a plastic or copper mallet and pull out the drive shaft from the hub.

Clean the splined joint (hub-drive shaft) from metal adhesive. 

scientia non olet · About LEMON Manuals