LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Axle Shafts, Transmission Control Module - Removal, Replacement And Installation (Coupe)) >> Drive Shafts, Boot Replacement (Aw50-42; 1998-1999) >> Constant velocity joints, inner >> Remove the clamp from the inner boot if it is to be replaced.

Remove the clamp from the inner boot if it is to be replaced.

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Inner Boot
GLL125657Courtesy of VOLVO CARS OF NORTH AMERICA.

Cleaning the inner constant velocity joints 

NOTE:

All inner constant velocity joints (manual and automatic) are to be cleaned while assembled and blown clean before greasing.

Use grease as specified in Oil, grease etc

scientia non olet · About LEMON Manuals