Control system AW, Engine management system, LH and EZK
WARNING: This page is about a different car, the 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
To connect the breakout box to AW, LH and EZK control systems with 30+30-pin connectors, (A+B) applies:
Connector A (engine side) uses measuring terminals 1-30 which correspond to terminals #A1-#A30 on the control module.
Connector B (car side) uses measuring terminals 31-60 which correspond to #B1-#B30 on the control module.
Adapter (981 3195) is used for connection purposes.