Cutting a cable

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cable Cut At Cable Terminal

Courtesy of VOLVO CARS OF NORTH AMERICA.

If the cable is connected to a connector first remove the cable with the cable terminal from the housing.

Cut the cable at the cable terminal.

Fig 2: Identifying Cable Terminal Cut Between Core Crimp And Insulation Wings

Courtesy of VOLVO CARS OF NORTH AMERICA.

Minimize length loss on cables

If there is a risk that the cable will be too short when the cable terminal is replaced follow this procedure in order to minimize length loss for tightly routed cables:

Cut the cable terminal between the core crimp and the insulation wings.