Locking tab cable terminals
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the receptacle housing has a secondary locking, this must be in the open position. Always push the cable terminal forward in the cavity first. Push it towards the connector side of the receptacle housing before inserting the terminal removal tool.
The locking tab secures the cable terminal
The illustration shows the location of the cable terminal in the housing with the locking tab (the primary locking) held by a catch in the cavity.
NOTE:
The text describes, and the illustration shows, cable terminals with a locking tab. The same principle also applies to cable terminals with two locking tabs.