Miscellaneous, exceptions

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Divided Cable Terminal

Courtesy of VOLVO CARS OF NORTH AMERICA.

The housings shown here have a divided cable terminal.

The cable terminals have no locking tab. The primary locking is located in the housing cavity on the cable side.

Fig 2: Identifying Pressed In Locking Catch

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use a feeler gauge approx. 0.15 mm.

Press in locking catch and extract the cable terminal.

Proceed to chapter New cable terminal and Seal SWS and plug . Replacing a cable terminal in order to crimp a new cable terminal.