1.6 Pin/Pin sockets

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying 1.6 Pin/Pin sockets (1 Of 2)

Courtesy of VOLVO CARS OF NORTH AMERICA.

For housings for 1.6 Pin/pin sockets no terminal removal tool is used.

The cable terminals have no locking tabs. The primary locking is located in the cavities.

Fig 2: Identifying 1.6 Pin/Pin Sockets

Courtesy of VOLVO CARS OF NORTH AMERICA.

With the secondary locking opened the cable terminals can be extracted from the cable side by pulling the cable.

No terminal removal tool is required.

See section Example 1 and Example 2A for the procedure.

Fig 3: Identifying Cavity Opening For 1.6 Pin/Pin Sockets

Courtesy of VOLVO CARS OF NORTH AMERICA.

The cavity opening for 1.6 Pin/Pin sockets is the smallest of the round cavity types.

Proceed to chapter New cable terminal and Seal SWS and plug . Replacing a cable terminal in order to crimp a new cable terminal.