Check the position of the cable
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
This is how a cable should be located in the terminal:
- The stripped core should be under the core wings (1). It must not stick out too far in front or behind the core wings.
- The cable insulation should only be under the insulation wings (2). It must not lie too far out in front of or lie too far in under the insulation wings.
Check the cable is firmly inserted by carefully holding the cable terminal and pulling on the cable.