LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Wheel Alignment - Specifications & Procedures) >> Wheel Alignment Procedures >> Camber Measurement >> Rear Measurement

Rear Measurement

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2000 Volvo V70, 2000 Volvo S70, 2000 Volvo C70, 1999 Volvo V70, and 1999 Volvo S70. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for play in the wheel bearings, the lateral link bushings and the control arm bushings. Set up and calibrate the test equipment being used. The car must be on a flat surface with the wheels on moveable plates.
  2. Check camber angle. See WHEEL ALIGNMENT SPECIFICATIONS  . Check the control arms for damage if the camber angle is outside specification.
scientia non olet · About LEMON Manuals