Faulty signal: Verification

HINT: After carrying out the repair, check that the fault has been remedied.

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Connecting Control Unit

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Reconnect connectors, reinstall components.
Ignition on.
Insert a CD-ROM disc with map information into the CD-ROM player.
Use System test function to test if the CD-ROM player is correctly connected. For more information about the System test, see System Test . The test can take up to approximately 1.5 minutes at longest.
Check that the CD-ROM player is connected or not.

Fig 4: Identifying VCT2000
Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the CD-ROM player correctly connected?