Intermittent fault
Check the control module and CD-ROM player connectors for contact resistance and oxidation according to Contact resistance and oxidation .
Check the cables between the control module #A4, #A5, #A6, #A18, #A19 and CD-ROM player terminals 4, 5, 11, 12 13 for an intermittent open-circuit according to Open-circuit, intermittent faults , an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults and an intermittent short-circuit to supply voltage according to Short-circuit to supply voltage, intermittent faults .
Remedy as necessary.
Other information:
- To access/replace the control module, see Replacing the control module, old system .
- To access/replace the CD-ROM player, see Replacing, CD-ROM player .
- To connect the breakout box, see Connecting the breakout box .
- Continue
Refer to Information