Temperature too high: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off.
- Reconnect connectors, reinstall components.
- Ignition on.
- Insert a CD-ROM disc with map information into the CD-ROM player.
- Use System test function to test CD-ROM player functions. For more information about the System test, see System Test
. The test can take up to approximately 4 minutes at longest.
Check if CD-ROM player is OK or not.
If the CD-ROM player functions OK is displayed.
Is the CD-ROM player OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Information