System Test
The system test with the Volvo Scan Tool (ST) can take up to approximately 6 minutes.
| Test: | Result: |
|---|---|
| CD ROM PL= | Test that the CD-ROM player is correctly connected. CON = CD-ROM is correctly connected. NOT CON= CD-ROM player is not correctly connected. |
| CD EJECT= | Test that the CD-ROM player is in the eject position (no CD-ROM disc installed). YES= Eject position (no disc inserted). NO= In position (disc inserted) If the CD-ROM player is not correctly connected (see above) this parameter does not display the correct status. |
| CD ROM= | Testing CD-ROM disc type YES= The CD-ROM disc is inserted NO= No CD-ROM disc is inserted If the CD-ROM player is in the eject position YES is always displayed If the CD-ROM player is not correctly connected (see above) this parameter does not display the correct status. |
| CD ROM PL= | Testing CD-ROM player function OK= Function is OK NOT OK= Function faulty |
| CONTROL MODULE= | Testing control module memory circuits OK= Memory circuits OK NOT OK= Memory circuits faulty |
| GPS= | Testing control module internal function for GPS reception. OK= Function OK NOT OK= Function not OK |
| TMC= | Testing TMC receiver OK= TMC receiver OK NOT OK= TMC receiver not OK NOT ACT= Car not equipped with TMC receiver, has an FM receiver. |
| FM= | Testing FM receiver OK= FM receiver OK NOT OK= FM receiver not OK NOT ACT= Car not equipped with FM receiver, has a TMC receiver. |