System settings (customer settings), Japanese market
The following system settings in the control module can regain the base values if the control module power supply fails, when the control module or the battery are changed for example. A new control module is always delivered with the base values set. After the control module is connected, or the power supply returned, the control module settings should be adjusted to the previous market and customer settings.
- Ignition on
- Select Setup with remote control.
- Select Language, System settings and Traffic information to change settings.
| Parameter | Setting, choice |
|---|---|
| Language: | English/Japanese Base value= Japanese |
| Detailed intersection map | ON/OFF Base value= On |
| Mark road driven | ON/OFF Base value= Off |