Install the camshaft cover

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Press Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the camshaft cover.
Tighten down the camshaft cover against the cylinder head with press tool 9995454 , 2 pcs.
As shown.
Torque the camshaft cover's screws.
Start from the inside and work outwards.

Tighten to 17 Nm .
Remove the tools 9995453 and 9995452 .
Install the spark plugs.
Install the ignition coils.