Removing the timing gear pulley

Fig 1: Identifying Timing Gear Pulley

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the cable duct from its mountings on the right-hand suspension turret.

Hold the cable duct out of the way and remove 

• the plug at the front of the variable valve timing unit (TX55)
• the centre screw in the variable valve timing unit (TX55).

Carefully pull out the timing gear pulley with the variable valve timing (VVT) unit.

Timing gear pulleys without variable valve timing units: 

Remove the screws and remove the timing belt pulley.

Remove tool 9995452 .