Disconnect the connectors

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Fuel Filler Pipe Ground Lead From Nut On Fuel Tank Level Sensor Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Fuel Filler Pipe Ground Lead

Courtesy of VOLVO CARS OF NORTH AMERICA.

Separate all the connectors on the bracket
Remove the rubber bracket around the wiring
Remove the ground lead for the fuel filler pipe from the nut on the cover of the fuel tank level sensor
Ensure that all cables routed through the hole at the fuel pump (FP) unit are unimpeded. Ensure that the cables can freely follow the fuel tank when it is lowered.