Initiating immobilizer control module
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
HINT: A fault was stored in the control module when storing the PIN while initiating.
- Ignition on.
- Try to initiate control module again according to Initiating a new immobilizer control module
.
Read diagnostic trouble codes (DTCs).
Has diagnostic trouble code (DTC) IMM-121 been stored again?
- YES
Refer to Replacing control module
- NO
Refer to Fault-tracing information